How to Clean Your Spray Tan Gun: The Ultimate Deep Clean Routine - Naked Tan Skip to main content

How to Clean Your Spray Tan Gun: The Ultimate Deep Clean Routine

How to Clean Your Spray Tan Gun: The Ultimate Deep Clean Routine

How to Clean Your Spray Tan Gun: The Ultimate Glow-Up Routine

Hey, tanning pro! 💖 We know your spray tan gun is your trusty sidekick in creating those flawless, bronzed looks. But did you know that keeping it clean is just as important as mastering your application technique?

Regular cleaning isn't just about hygiene—it’s essential for maintaining consistent performance, preventing solution build-up, and making sure your machine stays in top-notch condition. Plus, no one wants to deal with splatters or uneven sprays! So, let’s give your gun the glow-up it deserves with this fun and easy cleaning routine.

 

💦 Daily Deep Clean: Because Your Gun Deserves It

After a long day of making people glow like goddesses, your spray tan gun needs a little TLC too! Whether you’ve done just one tan or twenty-five, this routine will keep your gun working like a dream.

Step 1: Rinse and Shine 🌟

  • Empty the Cup: Start by removing the solution cup from your gun and pouring out any leftover tanning solution. Think of it like finishing your smoothie—don’t let it sit around and get gross!

  • Rinse the Cup: Give it a good wash under warm water until it’s sparkling clean.

  • Flush the Gun: Hold the gun’s intake tube directly under running water, pull the trigger, and let the water flow through the inside. This will help get rid of any leftover solution hiding in the nooks and crannies.

🔥 Step 2: The Deep Clean Spa Day

Now it’s time to get serious and give your gun a proper cleanse. This step is crucial to prevent clogs and keep your tans looking flawless.

What You’ll Need:

  • Hot Water: Don’t skimp on the temperature—hot water works best!

  • Methylated Spirits: Just a tablespoon will do (you can find this at your local supermarket).

How to Do It:

  1. Mix Your Magic Potion: Fill your spray cup with hot water and add a tablespoon of methylated spirits.

  2. Lock and Load: Screw the cup back into your gun.

  3. Turn Up the Power: Set your gun to the highest setting (level 8) and your machine to its max output (hit that + button four times).

  4. Spray It Out: Connect the hose and spray the entire cup of liquid into the sink. The hot water will break down any gunky residue, while the methylated spirits dissolve any stubborn bits.

💨 Step 3: Drying Like a Pro

Now that your gun’s squeaky clean, it’s time to dry it off properly to keep it performing its best.

  • Rinse Again: Give the cup another quick rinse to get rid of any leftover cleaning solution.

  • Shake It Off: Hold your gun over the sink and give it a good shake to release any remaining water.

  • Blow It Out: Use your machine’s airflow to dry the inside by pulling the trigger while air passes through. Repeat the shaking and drying process to make sure it’s completely moisture-free.

🔥 Why Deep Clean Every Day?

Even if you’ve only done one spray tan, it’s crucial to deep clean your gun at the end of the day. Letting the solution sit can cause build-up and clogging, making your gun less effective. Plus, any moisture left inside can affect the quality of your next spray tan—nobody wants patchy results!

🌟 The Final Glow Up

Cleaning your spray tan gun might sound like a chore, but it’s actually the secret to keeping your equipment running smoothly and your clients looking flawless. A little extra effort today means perfect results tomorrow!

Got any cleaning hacks or tips to share? Drop them in the comments below! Let’s keep those tans gorgeous and those guns spotless! 💕

Comments

Be the first to comment.
All comments are moderated before being published.